Innventia, SP och Swedish ICT har gått samman i RISE för att bli en starkare forsknings- och innovationspartner för näringsliv och samhälle.
Under 2017 kommer innventia.com att vara en av flera webbplatser inom RISE. Besök gärna ri.se för mer information om RISE.

Selected Publications - Paper Mechanics

Comparison of the physical properties of hardwood and softwood
Antonsson, S., Mäkelä, P., Fellers, C. and Lindström, M. E. (2009)
Nord. Pulp Pap. Res. J. 24(4):409-414.
 
Delamination position in multi-ply paperboeard achieved by different testing methods
Girlanda, O., Fellers, C. (2008)
Appita 61(4):107-112.
 
Modelling delamination in paperboard during sheet offset printing
Girlanda, O., Fellers, C. (2008)
Appita 61(2):113-119.
 
Verification of fracture mechanics theory and aspects of its practical use
Nordhagen, H., Gregersen, O. W., Mäkelä, P. (2008)
Progress in Paper Physics Seminar, pp. 231-234, Helsinki University of Technology, Espoo.
  
Effect of relative humidity cycle start point and amplitude on the mechano-sroptive creep of containerboard
Fellers, C., Panek, J. (2007)
Appita Annual Meeting, Appita, Carlton.
  
Mechanical properties of paper and their relation to packaging performance
Henriksson, L., Bredemo, R., Fellers, C., Stubbfält, G. (2007)
Appita Annual Conference, Appita, Carlton.
  
Evaluation of the tensile stress-strain properties in the thickness direction of paper materials
Girlanda, O., Fellers, C. (2007)
Nord. Pulp Pap. Res. J. 22(1):49-56.
  
In-plane hygro-viscoelasticity of paper at small deformations
Lif, J., Östlund, S., Fellers, C. (2005)
Nord. Pulp Pap. Res. J. 20(2):139-149.
 
The effect of moisture ratio and drying restraint on the stress relaxation of paper
Mäkelä, P. (2007)
Appita annual conference, Appita, Carlton.
 
Measuring out-of-plane shear properties of paperboard
Nygårds, M., Fellers, C., Östlund, S. (2007)
J. Pulp Pap. Sci. 32(2):105-109.
  
Condebelt drying and linerboard performance
Fellers, C., Panek, J., Retulainen, E., Haraldsson, T. (2005)
Nord. Pulp Pap. Res. J. 20(1):87-92.
  
Effect of fibre shape and fibre distortions on creep properties of kraft paper in constant and cyclic humidity
Panek, J., Fellers, C., Haraldsson, T., Mohlin, U.-B. (2005)
Advances in Paper Science and Technology, vol. 2, pp. 777-796, The Pulp and Paper Fundamental Research Society, Bury.
Predictions of anisotropic multiply board properties based on isotropic ply properties and drying restraints
Wahlström, T., Mäkelä, P. (2005)
Advances in Paper Science and Technology, vol. 1, pp. 241-281, The Pulp and Paper Fundamental Research Society, Bury.
  
The influence of through-thickness variation on the mechanics of paper drying
Östlund, M., Mäkelä, P., Östlund, S. (2005)
Advances in Paper Science and Technology, vol. 1, pp. 213-240, The Pulp and Paper Fundamental Research Society, Bury.
  
Residual stresses in paperboard through the manufacturing process
Östlund, M., Östlund, S., Carlsson, L.A., Fellers, C. (2005)
J. Pulp Pap. Sci. 31(4):197-201.
  
Tensile and ultrasonic stiffness of paper at different moistures: a clarification of the differences
Coffin, D. W., Lif, J. O., Fellers, C. (2004)
Nord. Pulp Pap. Res. J. 19(2):257-263.
  
A method for determinantion of delamination toughness in different positions in the thickness direction of paperboard
Lundh, A., Fellers, C. (2004)
Nord. Pulp Pap. Res. J. 19(2):224-228.
  
The influence of drying restraints and beating degree on resisual stress build-up in paperboard
Östlund, M., Östlund, S., Carlsson, L. A., Fellers, C. (2004)
J. Pulp Pap. Sci. 30(11):289-293.
The influence of drying conditions on residual stress build-up in paperboard
Östlund, M., Östlund, S., Carlsson, L. A., Fellers, C. (2004)
J. Pulp Pap. Sci. 30(11):312-316.
  
Principles of evaluation for the creep of paperboard in constant and cyclinc humidity
Panek, J., Fellers, C., Haraldsson, T. (2004)
Nord. Pulp Pap. Res. J. 19(2):155-163.
  
Analysis of the paper web during its passage through the drying section
Mäkelä, P. (2003)
International Paper Physics Conference, pp. 151-155, PAPTAC, Montreal.
  
Friction of linerboard based on recycled fiber
Garoff, N, Nilvebrant, N.-O., Fellers, C. (2002)
J. Appl. Polym. Sci. 85(7):1511-1520.
  
On the fracture mechanics of paper
Mäkelä, P. (2002)
Nord. Pulp Pap. Res. J. 17(3):254-274.
  
Out-of-plane Poisson's ratios of paper and paperboard
Stenberg, N., Fellers, C. (2002)
Nord. Pulp Pap. Res. J. 17(4):387-394.
 
Predicting the effect of reinforcment pulp characteristics in TMP papers for web breaks using fracture mechanicsFellers, C., Melander, J., Mohlin, U.-B. (2001)
Nord. Pulp Pap. Res. J. 16(4):257-260.
  
The Z-toughness method for measuring the delamination resistance of paper
Lundh, A., Fellers, C. (2001)
Nord. Pulp Pap. Res. J. 16(4):289-305.
  
Measuring the stress-strain properties of paperboard in the thickness direction
Stenberg, N., Fellers, C., Östlund, S. (2001)
J. Pulp Pap. Sci. 27(6):213-221.
  
Biaxial straining of handsheets during drying - effect on delamination resistance
Wahlström, T., Lundh, A., Hansson, T., Fellers, C. (2000)
Nord. Pulp Pap. Res. J. 15(3):237-242.
  
Laboratory method for biaxial straining of paper during drying
Wahlstrom, T., Fellers, C., Htun, M. (2000)
Tappi J. 83(7):75.
  
Prediction of crack growth initiation in paper structures using a J-integral criterion
Wellmar, P., Gregersen, O., Fellers, C. (2000)
Nord. Pulp Pap. Res. J. 15(1):4-11.
  
The influence of kapp number and surface energy on paper-to-paper friction
Bäckström, M., Fellers, C., Htun, M. (1999)
Nord. Pulp Pap. Res. J. 14(3):204-208.
  
The influence of wood extractives on paper-to-paper friction
Garoff, N., Jernberg, S., Nilvebrant, N.-O., Fellers, C., Bäckström, M. (1999)
Nord. Pulp Pap. Res. J. 14(4):320-329.
  
In-plane viscoelasticity of paper in the frequency domain
Lif, J. O., Fellers, C. (1999)
Nord. Pulp Pap. Res. J. 14(1):82-91.
  
Paper-to-paper friction - paper structure and moisture
Fellers, C., Bäckström, M., Htun, M., Lindholm, G. (1998)
Nord. Pulp Pap. Res. J. 13(3):225-232.
  
Paper friction - influence of measurement conditions
Johansson, A., Fellers, C., Gunderson, D., Haugen, U. (1998)
Tappi J. 81(5):175-183.

Contact

Library/Bibliotek
08 676 7111 eller 08 676 7115
Skicka e-post